 
BES-1230AC
FEATURES
- 3 head
cylinder arm
- 12 needles
- Automatic
colour change
- Quick-change
270° cap system
- Jumbo
bobbin
- Cam-driven,
single presser foot for fast, quit operation
- Noise
reduction feed mechanism
- Automatic
lubrication system
- Automatic
top and bottom thread trimmers
- Maximum
sewing speed of 1,000 rpm
- Adjustable
tubular frame holder
- Narrow
machine design: machine will fit through a 32"
door opening (with table assemblies removed)
- Trace
mode for verifying location of designs before sewing
- Built-in
3.5" floppy disk drive enables the machine
to run as an independent stand-alone unit and able
to read all popular
- embroidery
machine formats
- Machine
memory of 16 designs (a total of 280,000 stitches)
- Back
up or move forward through the design in increments
of 1, or 100 stitches or by colour changes
- Capable
of sewing flat, tubular and finished cap items
- Memory
retention after machine shut-off
AUTOMATIC
LUBRICATION SYSTEM
Brothers unique wick oiling system significantly reduces
machine maintenance downtime. Oil is poured into a
conveniently located reservoir on the machine and
a wick that is threaded through the internal workings
of the sewing head delivers oil when and where it
is needed, eliminating the time consuming task of
oiling numerous, hard to reach locations.
SINGLE,
CAM DRIVEN PRESSER FOOT
Developed by Brother, the cam-driven presser foot
allows the machine to run faster and quieter. The
precise movement of the cam reacts faster than the
previous spring loaded technology and reduces the
noisy pounding of the presser foot on the throat plate.
The single presser foot also facilitates increased
machine speed and less maintenance.
JUMBO
BOBBIN
Maximize system productivity with fewer bobbin changes
with the larger capacity, jumbo "M" style
bobbins. Brother perfected the performance of the
jumbo bobbin by designing the cams and gears inside
the sewing head to accommodate the longer rotation
of the larger bobbin.
EASY
TO USE CONTROL PANEL
Start sewing faster with the single, logical
commands found on the control panel. For example,
the hoop feed button moves the pantograph out from
under the needles for trouble free appliqué placement
and easier loading and unloading of hoops.
MEMORY
RETENTION
Resume stitching a partially complete design after
the machine has been turned off, unplugged or even
after a power failure. Shut the machine off to work
with a customer, go home for the evening or even move
the machine across town and never lose a stitch or
go off registration - another Brother first.
INDIVIDUAL
CAP FRAME ADJUSTMENT
Adjust the centre point of the cap on each head independently
while it's in the frame and mounted on the machine.
Eliminate off centre designs and time consuming framing
adjustments with this advanced cap frame driver design.
|
